Reform Metrac H7 X

Entry to the premium class
The 74 hp 4-cylinder turbo diesel engine in the Metrac H7 X excels thanks to high efficiency and performance. The comfortable cab with intuitive controls provides the exceptional comfort at work. High axle loads of 2,100 kg at the front and 2,600 kg make the Metrac H7 X a true workhorse. With a permissible gross weight of 4,000 kg, the Metrac H7 X delivers a high payload.
The new, powerful Bosch Rexroth hydrostatic unit ensures optimum performance on slopes and high pulling force. The large hydrostat radiator and temperature-controlled switching ensure that the hydrostat components are always optimally cooled for best performance. Automated reversal of the direction of rotation of the fan ensures that the radiator never gets dirty – it also cleans itself automatically.
The benefits at a glance
Engine
- VM R754ISE5
- 54.5 kW / 74 hp
- Torque 310 Nm
- 2,300 rpm nominal speed
- Emission level 5
- Diesel particulate filter (DPF)
Chassis
- 4 steering modes
- Wheelbase 2,045 and 2,245 mm
- Tyres up to 440/50 R17
- Oscillation up to 15 degrees
Drive
- Hydrostatic drive
- 4 speed ranges
- Powerful Bosch Rexroth hydrostatic components
- 40 km/h
- Hydrostatic cooling with automatic reversal of direction of rotation
Hydraulics/Linkages
Hydraulic pump 28.7 l/min at 195 bar
Front linkage
- Angle swing lift Cat .1
- Lifting force 1,500 kg
Rear linkage
- Cat 1 and 2
- Lifting force 1,500 kg
PTOs
Front and rear 540 and 1,000 rpm
Power | 54.5 kW / 74 hp |
Dead weight | from 2,275 kg |
Wheelbase | 2,045 / 2,245 mm |
Height incl. roof * | 2,165 mm |
Height with rotating warning light * | 2,365 mm |
Wheel outer width * | 2,020 mm |
Track front and rear * | 1,630 mm |
Length without rear linkage * | 3,210 / 3,410 mm |
Length with rear linkage | 3,630 mm |
* depending on the tyres