Reform Metrac G3 X

The entry level to the X series has never been more compact than the G3 X.
The characteristic features of the X series are the final drives, which protect and support the drive train. This reduces wear and increases the service life of the vehicle. The Metrac G3 X can optionally be equipped with a closed cab, heating and defroster, making the machine fit for use in poor weather conditions.
The benefits at a glance
Engine
- Kubota V2003-M
- 32.1 kW / 44 hp
- Torque 128.40 Nm
- 2,800 rpm nominal speed
- Emission level 3A
Chassis
- 4 steering modes
- Wheelbase 1,665 mm
- Tyres 29×13.50-15
Drive
- 8/8-speed shuttle gearbox
- 23 km/h
Hydraulics/Linkages
Hydraulic pump 26.6 l/min at 180 bar
Front linkage
- Front 3-point linkage
- Lifting force 900 kg
Rear linkage
- Cat 1 and 2
- Lifting force 950 kg
PTOs
Front and rear 540 rpm
Power | 32.1 kW / 44 hp |
Dead weight | from 1490 kg |
Wheelbase | 1,665 mm |
Height incl. roof * | 1,965 mm |
Height with rotating warning light * | 2,251 mm |
Wheel outer width * | 1,985 mm |
Track front and rear * | 1,635 mm |
Length without rear linkage * | 2,655 mm |
Length with rear linkage | 2,975 mm |
* depending on the tyres